AREA I – Project Management, Execution, and Controls

For Project Managers, Project Controls, and all Project assurance and support personnel

Integrated Project Management & Execution

3 days

This course utilizes an applied content methodology to give you the knowledge required to effectively plan,  integrate, control, and execute your projects using an integrated strategy.  The content is aligned to the PMBOK and utilizes decades of real world Project Management and Execution experience combined with Best Practices on small and major capital EPC projects. The course focuses on Tendering and planning, communications, risk and change management, document and records control, and project controls methods and tools to successfully setup and control the project.  The course interfaces with Quality  Management and Business Process Best Practices to provide a thorough and integrated review and analysis of the methods, processes, disciplines, personnel, and critical information and data exchanges required to make your project execution more efficiently aligned with the Organization and Customer objectives, increasing value and Customer satisfaction.

Inquire Here

Project Controls Workshop

4 days

This project controls course greatly expands on the knowledge areas taught in the Project management course and is centered around Earned Value Management (EVM) control methodologies. It takes a thorough review of each knowledge area including contacting, planning, budgeting, scheduling, resource planning, scheduling, performance measurement, risk and change management, and reporting. The course utilizes fictional company scenarios in a workshop format to continually engage students in problem solving exercises. The course was developed by veteran Project Controls professionals to deliver advanced training for all processes within the project controls cycle.

Inquire Here

AREA II – Organization & Operations Quality and Compliance

For managers and personnel throughout the Organization and Operations who are involved with Quality Management, Business processes and systems, and ensuring compliance and sustainability to these areas

Fundamentals of Quality Management and Quality Documents

1 day

This course gives an introduction to quality management that’s recommended as a prerequisite for other more advanced courses. It provides students with a fundamental understanding of the principles and concepts of quality and quality management, principles of document and records management, international standards, how it affects employees and the organization, and the relationship between quality and risk management.  It also provides students with a fundamental understanding of the principles and concepts of managing quality and governance documentation, how to control documentation, document levels and hierarchy, electronic systems, and its role in the quality system and compliance process. The course sets a foundation on which students can build more advanced quality knowledge within their organization.

Inquire Here

Fundamentals of Auditing

1 day

This course gives an introduction to auditing that provides students with a fundamental understanding of the principles and concepts of auditing, the objective, benefits to the organization, types of audits, audit tools, and the roles in the audit process.  The course sets a foundation on which students can build more advanced auditing knowledge within their organization.

Inquire Here

Introduction to Identification and Traceability

2 days

This course gives a thorough introduction to the uses and methods in an effective ID & Traceability system. This course covers how to achieve traceability, the types, the responsibilities of each party, and the processes and tools involved.

Inquire Here

Fundamentals of Preventive Maintenance

2 days

This course gives a thorough introduction to the requirements and methods for creating and implementing a Preventive Maintenance program throughout the operation and facilities.

Inquire Here

Fundamentals of the Management Review

1 day

This course gives an introduction to the Management Review process and its importance to the organization and its continual improvement. It provides students with a fundamental understanding of the principles and concepts of the management review, the required interfaces and information, the roles and responsibilities of people, the process and tools you need to perform the review, and its role in the quality and compliance process.

Inquire Here

Introduction to the Technical Standards in the O&G Industry – Subsea Systems

2 days

The course covers the general use of the petroleum and natural gas international standards, such as API, ISO, DnV, NACE, ASTM and ASME, which specify technical requirements and give recommendations for the development of petroleum subsea facilities and production systems. The course will provide knowledge of technical requirements to develop subsea equipment (for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of wellhead and Christmas tree equipment) and managing of a subsea production system (SPS), among others.

Inquire Here

AREA III – Engineering & Technology Development

For personnel throughout the Organization, Operations, and Projects who are involved with Engineering and Technical activities that support successful and safe product and service delivery, and ensuring compliance to these areas

Oil & Gas

Emerging Technologies & Technology Validation

2 days

Within the global context of innovation and efficiency, from design to equipment installation and asset management to increase reliability, safety and life of the systems in operation, this course will enable the professional in order to recognize the methodologies and addressing them so correct for solution of problems of high cost of design & development, reducing time, efficiency increase in the flow of hydrocarbons with concepts of standardization & parametrical configuration of projects and equipment.

Inquire Here

Methodologies in New Product Development

2 days

In two days of training, engineers project professionals will be exposed to the most effective and modern methodologies for the development of new technologies, as well as deepen in the theme of new product validation, bringing detailed information on standards and best practices which accelerate the maturation process and induce robustness to the final result. Practical examples will be studied and developed so that the concepts are well absorbed.

Inquire Here

Corrosion and Cathodic Protection

4 days

This four (4) day course covers the fundamental principles of corrosion and cathodic protection and its practical applications such as marine structures in seawater environment. The course will provide corrosion prevention techniques, carrying out detailed information on cathodic protection specification, design, testing and monitoring. Applicable standards such as NACE, BS/ISO, and DnV relevant to material corrosion and cathodic protection design will be discussed. Participants will gain advanced knowledge and skills in prevention of metallic structures corrosion and cathodic protection of common types of steel structures immersed in waters.

Inquire Here

Introduction to the Technical Standards in the O&G Industry – Subsea Systems

2 days

The course covers the general use of the petroleum and natural gas international standards, such as API, ISO, DnV, NACE, ASTM and ASME, which specify technical requirements and give recommendations for the development of petroleum subsea facilities and production systems. The course will provide knowledge of technical requirements to develop subsea equipment (for the performance, dimensional and functional interchangeability, design, materials, testing, inspection, welding, marking, handling, storing, shipment, purchasing, repair and remanufacture of wellhead and Christmas tree equipment) and managing of a subsea production system (SPS), among others.

Inquire Here

Oil Storage Tanks (API-650) – Project

3 days

This course offers an  introduction about the importance, types, materials, dimensions, standards and finally the presentation of calculation spreadsheets that define the thickness to be used in each course of the shell according to the carbon steel specification, product density, joint efficiency , diameter and height. In addition to this approach, also will be presented calculation spreadsheets that define the use or not of stiffening rings along the tank shell due to the higher wind speed estimated in the area. On this occasion will be simulated several cases aiming to compare the results against the data of tanks already in operation. The evolution of this presentation will be enriched with numerous field records in order to clarify all the issues involved in the development of each topic.

Inquire Here

Subsea Control Systems

3 days

In this course you will learn about subsea control systems applied to the oil and gas industry.
Starting by introducing typical subsea field layouts, its main equipment and the different control systems type, philosophies and installed components, attendees will be able to understand how and why control systems are relevant for the optimization of production. Covering from traditional direct hydraulic to advanced asset-monitored and all-electrical solution, learners will explore systems architecture, understand interfaces and deep-dive into components details, going throw different disciplines such as hydraulics, electrical, software and hardware in order to provide full control systems awareness.

Inquire Here

Oil Storage Tanks (API-650) – From Construction to commissioning

3 days

Receipt, identification, control and storage of materials on site.  Qualification of welders according to specific procedures as well as procedures of consumables storage, calibration of equipment and instruments in general beyond of other procedures as construction, assembly and finally the hydrostatic test followed by all safety conditions involved in each step. On this occasion will be presented the constructive forms of Pontoon-Type floating roofs not forgetting of the buoyancy conditions in according to API-650 standard. As differential and unique, it will be presenting a calculation spreadsheet that defines the buoyancy limit for pontoon-type floating roof commonly used in tanks where the product volatility is very high what motivates this kind of roof.

Inquire Here

Coating & Smart Coating

3 days

Coating selection, in the O&G industry, was focused to prevent the corrosion of metallic structures, in this 3 days of training will be possible to understand a new approach and the benefits: Smart Coating (NanoTechnology). Basic concepts in corrosion of metals; main corrosion types; most effective anticorrosion methods: use of corrosion inhibitors, cathodic protection, designing adequately, metallic and organic coatings. Innovation and nanotechnology strategies to develop smart coatings with the ability to undergo self-healing effect. Less frequent maintenance leading to lower costs.

Inquire Here

Fundamentals of R&D Project Planning

2 days

The goal of this course is to explore basics about time management and application on projects with typical phases of Oil and Gas projects and R&D. During those 2 days will be presented a solid introduction about planning, different technics and practical application providing the participants 360 ° overview that will enable them to ready and understand schedules; provide inputs with quality; interact in a constructive way helping the team to explore opportunities and mitigation of deviations.

Inquire Here

Planning methodology and practical application to R&D Projects

2 days

This course will explore the utilization of the planning methodology; level of details for schedules on different cases; how powerful schedules are to communicate with the team and stakeholders; plan how to control and update your schedule. This course will build a critical view on team leaders, project managers, controllers and key team members on how to use planning methodology efficiently. Applications will focus product and technology development; implementation and improvement of processes; small internal and external projects.

Inquire Here

Subsea Equipment

3 days

In this three-day course we will cover the technical aspects of design, manufacture, installation and maintenance of: Production Systems Submarines; Subsea equipment, Wet Christmas Tree (ANM); manifold; Special equipment Pumping and processing; Connection Systems. Including addressing the concepts of pipelines, risers and subsea umbilicals. Main Types of Submarines Arrangements; installation methods; Typical vessels;

Inquire Here

Energy Generation & Transmission

Power Transmission Line Project

2 days

This course was designed with the objective of presenting the basics of a line of conventional electricity transmission. The course covers the characterization of the components necessary for the development of an optimized design, the main circuit configurations (cable), models of steel towers, the mandatory safety requirements (minimum electrical distances) and commissioning for transmission line energization

Inquire Here

Biofuels and Bioenergy Technologies

2 days

Bioenergy  from biomass is a promising alternative source that can take the place of fossil fuels. Biomass can be used to produce energy directly by combustion or can be converted into biofuels by thermal, chemical and biochemical processes. This course provides an introduction to renewable energies, specifically from biomass. Participants will learn about the feedstocks, biomass conversion technologies in solid, liquid and gaseous biofuels, environmental impact and the application of biomass around the world. The course is open to the general public interested in renewable energy.

Inquire Here

Electrical Grid Planning

2 days

Brazil’s experience to boost Nigeria’s Expected Growth. Why planning? Forecasting demand and energy.
Energy matrix: restrictions, environment, trends and natural advantages. Connecting dots, power plants to consumers: costs and losses, renewables and intermittent sources, smart grids.
Expanding the grid: Criteria, studies.
Brazil’s energy sector: Structure, liabilities, development, challenges, lessons.
Planning, construction and operation in Brazil.
Delivering energy to big urban centers: compact substations and underground lines.
Examples applied to Nigeria’s electrical grid.
The course aims to explain Brazil’s recent experience in power generation and transmission planning, focusing in possible applications to Nigeria’s present and future electrical grid.

Inquire Here

MicroGeneration:
Autonomous and Distributed Generation of electric power

3 days

In this course we will make an advanced study of the main features of the so-called distributed and local generation. The use of small available resources (solar, wind, hydroelectric, biomass, etc.) for power generation is the most viable alternative supply for remote areas or regions where the power utilities still do not deliver electricity, and even the future solution for big cities energy problems.
– Day1: Knowing the Micro Generation: Study of Global features of Micro generation, all the existing equipment and possibilities.
– Day2: Where did it work: Study of the biggest success cases focused on the change in generation strategies and legal incentives.
– Day3: In Africa: Study of the local characteristics of generation and possibilities of deployment and growth of micro generating alternatives. What are the main barriers and the best options. We will try to map out together an action plan to promote micro generation in the country.

Inquire Here

Innovation

Innovation Management

2 days

The course leads the student in the process of reflection about the Innovation Strategic Management aspects and the impact on productivity and competitiveness. The Innovation as a key factor of organizational culture and the strategic management of people, environment, processes and resources. The topics of this course are: The Innovation and competitiveness strategy; science, technology and innovation; The concept and different types of innovation; Creativity and entrepreneurship based on innovative profile; the Innovation as a routine – People, Environment and Process; Practices and tools for Innovation Management. Innovation and Business Model; Key Indicators for the management of Innovation. Cases of innovation management;

Inquire Here

Concepts of LEAN manufacturing tools

2 days

This course focuses on explaining some tools of lean manufacturing system, 5S, Kanban, VSM, visual management, Poka Yoke, PDCA to eliminate the seven wastes (over-production, waiting, transportation, over-processing, inventory, motion and defects ).

Inquire Here

General

Failure
Analysis

3 days

This course introduces failure analysis of mechanical components by theory and examples. Concepts of fracture mechanics are presented prior to on-site and laboratory inspection practices. Techniques such as optical stereoscopy, quantitative metallography, non-destructive testing (NDT), electronic microscopy and chemical microanalysis are approached through their use in the analysis of failed components. Finally, cases of failure in rolling elements, atmospheric and sea water corrosion, hydrogen cracking, structural welds and
fasteners are discussed.

Inquire Here

Technical Mechanical Drawing

3 days

This course focuses interpret mechanical drawings, sketches, perspectives, projections, dimensioning, cuts and sections.Concepts of design specifications of technical standards as well as their dimensional tolerances.

Inquire Here

Basic concepts of 2D and 3D software for mechanical design

2 days

This course focuses on demonstrating the possibilities of using 2D and 3D software to develop mechanical designs and explore the interface, basic tools to create sketches, model parts and detailed manufacturing drawings.

Inquire Here

Metrology Mechanics

2 days

This course focuses on presenting the basic metrological concepts, quality control methods, as well as instrumental, tolerance systems and surface adjustments. It covers the dimensions of analysis, principles, deviations, applications and resolutions.

Inquire Here

Industrial electrical projects

3 days

This course was developed for designers of industrial electrical installations. The themes will provide basic knowledge for the initial planning of industrial electrical installations until the final test load. During the training will be shown the guidelines to make surveys of charges, the forms of distribution of power circuits, short circuits and power factor calculations, the dimensioning of the protections of the feeder circuits, switching equipment and motor protection electrical and characteristics of electrical installations of special purpose equipment. In addition, we discuss the safety aspects when working with electricity.

Inquire Here

Electrical Projects: Buildings

2 days

The course added general knowledge to the design of electrical installations of building projects related to the principles of quality, efficiency and economy and, above all, respecting the safety rules. Important issues will be discussed, such as, the prediction of loads and energy demand, how to achieve a balanced division of an installation in terminal circuits, the correct sizing of electrical conductors, conductor protections, conduits and other devices, grounding systems projects, protection against electric shock and against atmosferic discharges.

Inquire Here

Maintenance of Industrial Machinery and Electric Equipment

2 days

The training will train students in the interpretation of electrical drawings, line and multifilament diagrams, the identification of possible faults in the circuits of industrial equipment and its solution. Provide the student with knowledge to manage a planned maintenance process in an industrial plant, through the production system analysis on the interface with the maintenance: Methods and planning, supply of reserves necessary to realization the maintenance, control of quality indices, monitoring indicators performance, organization and logistics and solid waste management from electrical installations.

Inquire Here

Fundamentals of R&D Project Planning

2 days

The goal of this course is to explore basics about time management and application on projects with typical phases of Oil and Gas projects and R&D. During those 2 days will be presented a solid introduction about planning, different technics and practical application providing the participants 360 ° overview that will enable them to ready and understand schedules; provide inputs with quality; interact in a constructive way helping the team to explore opportunities and mitigation of deviations.

Inquire Here

Planning methodology and practical application to R&D Projects

2 days

This course will exlpore the utilization of the planning methodology; level of details for schedules on different cases; how powerful schedules are to communicate with the team and stakeholders; plan how to control and update your schedule. This course will build a critical view on team leaders, project managers, controllers and key team members on how to use planning methodology efficiently. Applications will focus product and technology development; implementation and improvement of processes; small internal and external projects.

Inquire Here

SEMS Regulations

2 days

The course provides an overview of the current requirements for developing a Safety and Environmental Management System incorporating the API RP75 (Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities), and the latest Notices to Lessees from the BSEE. The course also provides students with an understanding of each requirement of the regulation and its associated API recommended practice, as well as a review of possible methods of fulfilling the requirements, relating them to other management systems and the techniques used in those management systems. The course gives class participants a forum for discussion of ways in which they can discuss methods they have used to prepare a Safety and Environmental Management System.

Inquire Here